high stability thin film chip resistor 0.05 % (1000 h rated power at 70 c) www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 31006 66 revision: 06-jul-06 tnpw vishay tnpw precision thin film flat chip resistors are the perfect choice for most fields of modern electronics where reliability and stability is of major concern. typical applications include telecommunication, industrial, medical equipment, high-end computer and audio/video electronics. features ? metal film layer on high quality ceramic ? protective top coat ? tin/lead (pb) solder contacts ? excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at + 70 c) ? low temperature coefficient and tight tolerances ( 0.1 %; 10 ppm/k) applications ? automotive ? telecommunication ? medical equipment ? industrial equipment 1) size not specified in en 140401-801 2) rated voltage . the power dissipation on the resistor generates a temperature rise aga inst the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). the rated dissipati on applies only if the permitted film temperature is not exceeded 3) measuring conditions in accordance with en 140401-801 ? tnpw 0402 without marking ? extended values, tighter toler ances and temperature coefficient available on request standard electrical specifications tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 1) tnpw2010 tnpw2512 1) metric size rr 1005m rr 1608m rr 2012m rr 3216m rr 3225m rr 5025m rr 6332m resistance range 10 to 100 k 10 to 332 k 10 to 1 m 10 to 2 m 10 to 3.01 m 10 to 4.99 m 10 to 8.87 m resistance tolerance 1 %; 0.5 %; 0.1 % temperature coefficent 50 ppm/k; 25 ppm/k; 15 ppm/k; 10 ppm/k 50 ppm/k; 25 ppm/k climatic category (lct/uct/days) 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 rated dissipation, p 70 2) 0.063 w 0.1 w 0.125 w 0.25 w 0.33 w 0.4 w 0.5 w operating voltage, u max ac/dc 50 v 75 v 150 v 200 v 200 v 300 v 300 v maximum permissible film temperature 155 c 155 c 155 c 155 c 155 c 155 c 155 c thermal resistance 3) 870 k/w 550 k/w 440 k/w 220 k/w 170 k/w 140 k/w 110 k/w insulation voltage: u ins 1 min 75 v 100 v 200 v 300 v 300 v 300 v 300 v continuous 75 v 75 v 75 v 75 v 75 v 75 v 75 v failure rate 0.3 x 10 -9 /h 0.3 x 10 -9 /h 0.3 x 10 -9 /h 0.3 x 10 -9 /h 0.3 x 10 -9 /h 0.3 x 10 -9 /h 0.3 x 10 -9 /h weight/1000 pcs. 0.65 g 2 g 5.5 g 10 g 16 g 28 g 39 g pr
document number: 31006 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 06-jul-06 67 tnpw high stability thin film chip resistor 0.05 % (1000 h rated power at 70 c) vishay dimensions size dimensions millimeters inch metric l w h t1 t2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.10 0603 1608 1.6 0.10 0.85 0.10 0.45 0.10 0.3 0.20 0805 2012 2.0 0.15 1.25 0.15 0.45 0.10 0.4 0.20 1206 3216 3.2 0.15 1.6 0.15 0.55 0.10 0.5 0.25 1210 3225 3.2 0.15 2.45 0.15 0.60 0.15 0.5 0.25 2010 5025 5.0 0.15 2.5 0.15 0.60 0.15 0.6 0.25 2512 6332 6.3 0.20 3.1 0.15 0.60 0.15 0.6 0.25 solder pad dimensions millimeters size reflow soldering wave soldering inch metric a b l a b l 0402 1005 0.4 0.6 0.5 - - - 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 1210 3225 0.9 2.5 2.0 1.1 2.5 2.3 2010 5025 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 1.0 3.2 5.2 1.2 3.2 5.2 temperature coefficient and resistance range type tcr tolerance resistance value e-series tnpw0402 50 ppm/k 1 % 10r - 100k 24 -96 0.5 % 10r - 100k 24-192 0.1 % 47r - 100k 25 ppm/k 1 % 10r - 100k 24 -96 0.5 % 10r - 100k 24-192 0.1 % 47r - 100k 15 ppm/k 0.1 % 10 ppm/k 0.1 % tnpw0603 50 ppm/k 1 % 10r - 332k 24 -96 0.5 % 10r - 332k 24-192 0.1 % 25 ppm/k 1 % 10r - 332k 24 -96 0.5 % 10r - 332k 24-192 0.1 % 15 ppm/k 0.1 % 47r - 332k 10 ppm/k 0.1 % tnpw0805 50 ppm/k 1 % 10r - 1m0 24 -96 0.5 % 10r - 1m0 24-192 0.1 % 25 ppm/k 1 % 10r - 1m0 24 -96 0.5 % 10r - 1m0 24-192 0.1 % 15 ppm/k 0.1 % 47r - 1m0 10 ppm/k 0.1 %
www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 31006 68 revision: 06-jul-06 tnpw vishay high stability thin film chip resistor 0.05 % (1000 h rated power at 70 c) 1) please refer to packing table tnpw1206 50 ppm/k 1 % 10r - 2m0 24 -96 0.5 % 10r - 2m0 24-192 0.1 % 25 ppm/k 1 % 10r - 2m0 24 -96 0.5 % 10r - 2m0 24-192 0.1 % 15 ppm/k 0.1 % 47r - 2m0 10 ppm/k 0.1 % tnpw1210 50 ppm/k 1 % 10r - 3m01 24 -96 0.5 % 10r - 3m01 24-192 0.1 % 47r - 2m13 25 ppm/k 1 % 10r - 3m01 24 -96 0.5 % 10r - 3m01 24-192 0.1 % 47r - 2m13 15 ppm/k 0.1 % 10 ppm/k 0.1 % tnpw2010 50 ppm/k 1 % 10r - 4m99 24 -96 0.5 % 10r - 4m99 24-192 0.1 % 47r - 1m0 25 ppm/k 1 % 10r - 4m99 24 -96 0.5 % 10r - 4m99 24-192 0.1 % 47r - 1m0 tnpw2512 50 ppm/k 1 % 10r - 8m87 24 -96 0.5 % 10r - 8m87 24-192 0.1 % 47r - 1m0 25 ppm/k 1 % 10r - 8m87 24 -96 0.5 % 10r - 8m87 24-192 0.1 % 47r - 1m0 part number and product description products can be ordered using either the product description or the part number. for ordering tnpw with lead (pb)-free contacts please refer to latest edition of data sheet tnpw e3. part number: (tin lead) tnpw12061k32deta model value tolerance tcr packing 1) special tnpw 0402 tnpw 0603 tnpw 0805 tnpw 1206 tnpw 1210 tnpw 2010 tnpw 2512 r = decimal k = thousand m = million (4 digits) b = 0.1 % d = 0.5 % f = 1.0 % h = 50 ppm/k e = 25 ppm/k x = 15 ppm/k y = 10 ppm/k ta tc td tf tg cn ty up to 2 digits blank = standard historical part number: tnpw-1206 1.32k 0.5 % t-9 rt1(will continue to be accepted) tnpw-1206 1.32k 0.5 % t-9 rt1 model resistance value tolerance tcr packing 1) tnpw-0402 tnpw-0603 tnpw-0805 tnpw-1206 tnpw-1210 tnpw-2010 tnpw-2512 examples: 1k32 = 1320 99.68k = 99 680 360 = 360 0.1 % 0.5 % 1.0 % t-2 = 50 ppm/k t-9 = 25 ppm/k t-10 = 15 ppm/k t-13 = 10 ppm/k rt1 rt6 rt7 r02 r67 r52 r75 temperature coefficient and resistance range type tcr tolerance resistance value e-series npw12061k t 32deta
tnpw high stability thin film chip resistor 0.05 % (1000 h rated power at 70 c) vishay document number: 31006 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 06-jul-06 69 1) r52/cn only for precision resistors with to lerance 0.1 % and te mperature coefficient 25 ppm/k description production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a super high grade ceramic substrate and conditioned to achieve the desired temperature coefficient. a special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. assembly the resistors are suitable for processing on automatic smd assembly systems. packing model tape width [mm] pitch [mm] reel diameter [mm/inch] pieces per reel packing code for product description packing code for part number type of carrier tape tnpw 0402 8 2 180/7 10 000 rt7 td paper tnpw 0603 tnpw 0805 tnpw 1206 tnpw 1210 8 4 180/7 1000 r52 1 cn 1 paper tnpw 0603 tnpw 0805 tnpw 1206 tnpw 1210 8 4 180/7 5000 rt1 ta paper tnpw 0603 tnpw 0805 tnpw 1206 tnpw 1210 8 4 330/13 20 000 rt6 tc paper tnpw 2010 12 4 180/7 1000 r75 ty blister 4000 r02 tf blister tnpw 2512 12 4 180/7 1000 r75 ty blister 2000 r67 tg blister 120 110 100 90 80 70 60 10 100 1k 10k 100k non-linearity resistance value in non-linearity a 3 in db tnpw1206 tnpw0805 tnpw0603 tnpw0402 3 2 1 0.5 0.3 0.1 0.01 0.03 0.05 100 1k 10k 100k 1m current noise resistance value in current noise in v/v tnpw0402 tnpw0805 tnpw0603 tnpw1206
www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 31006 70 revision: 06-jul-06 tnpw vishay high stability thin fi lm chip resistor 0.05 % (1000 h rat ed power at 70 c) 60 40 20 0 - 20 - 40 - 60 - 8 0 tnpw0603 hf performance 1510 50 100 500 1000 fre qu ency f in mhz [z]-ro in % ro 10 100 1k 4.75k 10k 60 40 20 0 - 20 - 40 - 60 - 8 0 1 5 10 50 100 500 fre qu ency f in mhz hf performance phase an g le in ? tnpw0603 10 100 1k 4.75k 10k 1000 60 40 20 0 - 20 - 40 - 60 - 8 0 [z]-ro in % ro hf performance 1510 50 100 500 1000 fre qu ency f in mhz tnpw0 8 05 10 100 1k 10k 60 40 20 0 - 20 - 40 - 60 - 8 0 phase an g le in ? 1 5 10 50 100 500 fre qu ency f in mhz hf performance tnpw0 8 05 10 100 1k 10k 1000 90 8 0 70 60 50 40 30 20 10 0 temperature rise 0 0.1 0.2 0.3 0.4 0.5 power in w 0402 1206 0 8 05 0603 2010 2512 temperature rise in c deratin g 120 100 8 0 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 ambient temperature in c % n i r e w o p d e t a r 70 en
document number: 31006 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 06-jul-06 71 tnpw high stability thin film chip resistor 0.05 % (1000 h rated power at 70 c) vishay 3k 1k 100 10 10r 100r 1k 10k 100k sin g le-pulse hi g h volta g e overload test 1.2/50 s en140000 4.27 resistance v al u e in test volta g e in v tnpw0 8 05 tnpw0603 3k 1k 100 10 10r 100r 1k 10k 100k sin g le-pulse hi g h volta g e overload test 10/700 s en140000 4.27 resistance v al u e in test volta g e in v tnpw0 8 05 tnpw0603 100 10 1 0.1 0.01 10 -5 10 -4 10 -3 10 -2 10 -1 110 square pulse t i in s pulse rating p > 0 power rating p in w secondary conditions: a) p > 0 (peak pulse, single pulse) b) ? u 70 c c) ? max see diagram (max pulse voltage) tnpw0805 tnpw0603 100 10 1 0.1 0.01 10 -5 10 -4 10 -3 10 -2 10 -1 110 square pulse t i in s pulse rating p p 70 secondary conditions: a) p p 70 (permissible constant power at ? u = 70 c) b) ? u 70 c c) ? max see diagram (max. pulse voltage) power rating p in w tnpw0805 tnpw0603 500 300 400 200 100 0 square pulse t i in s maximum pulse voltage 10 -5 10 -4 10 -3 10 -2 10 -1 110 secondary conditions: a) p see diagram (pulse rating) b) ? u 70 c pulse voltage ? max in v tnpw0805 tnpw0603
www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 31006 72 revision: 06-jul-06 tnpw vishay high stability thin f ilm chip resistor 0.05 % (1000 h rate d power at 70 c) test and requirements all tests are carried out in accordance with the following specifications: en 60115-1, generic specification (includes tests) en 140 400, sectional specification (includes schedule for qualification approval) en 140 401-801, detail specification (includes schedule for conformance inspection) the following table contains on ly the most important tests. for the full test schedule refer to the documents listed above. the testing also covers most of the requirements specified by eia/is-703 and jis-c-5202. the tests are carried out in accordance with iec 60068 and under standard atmospheric conditions in accordance with iec 60068-1, 5.3. climatic category lct/uct/56 (rated temperature range: lower category temperature, upper category temperature; damp heat, long term, 56 days) is valid. unless otherwise specified the following values apply: temperature: 15 c to 35 c relative humidity: 45 % to 75 % air pressure: 86 kpa to 106 kpa (860 mbar to 1 060 mbar). the components are mounted for testing on boards in accordance with en 60115-1, 4.31 unless otherwise specified. the parameters stated in the test procedures and requirements table are based on the required tests and permitted limits of en 140 401-801. however, some additional tests and a number of improvements against those minimum requirements have been included. test procedures and requirements test conditions of test test results tnpw0402 to tnpw2512 tolerances 0.1 %; 0.25 % 0.5 %; 1.0 % < 100r 100r endurance test at 70 c iec 60115-1 4.25.1 1000 hours at 70 c, 1.5 hours ?on?, 0.5 hours ?off? 0.1 % 0.05 % 0.25 % endurance at uct iec 60115-1 4.25.3 1000 hours at 125 c without load 0.1 % 0.05 % 0.5 % overload test iec 60115-1 4.13 short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.05 % 0.02 % 0.1 % thermal shock iec 60115-1 4.19, iec 60068-2-14 rapid change between upper and lower category temperature 0.05 % 0.02 % 0.1 % damp heat steady state iec 60115-1 4.24, iec 60068-2-3 56 days at 40 c and 93 % relative humidity 0.1 % 0.05 % 0.5 % resistance to soldering heat iec 60115-1 4.18, iec 60068-2-20 10 seconds at 260 c solder bath temperature 0.05 % 0.02 % 0.1 % applicable specifications ? cecc40000/40400 ? en140400 ? eia 575 ? en 140401-801 ? en 60115-1 ? iec 60286-3
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
